Move cursor over image to zoom.
Click on image to zoom.
Move cursor over image to zoom.
Click on image to zoom.
Move cursor over image to zoom.
Click on image to zoom.
Move cursor over image to zoom.
Click on image to zoom.
Move cursor over image to zoom.
Click on image to zoom.
Move cursor over image to zoom.
Click on image to zoom.
Move cursor over image to zoom.
Click on image to zoom.
DD 350-CA Core drill
New productItem #r3411829
Heavy-duty diamond coring machine with high-frequency motor and optional auto-feed unit for rig-based coring from 52-500 mm (2-1/16 - 19-11/16”) in diameter
- Diameter range: 52 - 500 mm
- Rated input voltage: 230 V
- Base material: Concrete, Reinforced concrete
Share
Features
- Powerful high-frequency motor with electronic speed control for optimum power delivery over the entire diameter range
- Compatible with the DD AF-CA automatic feed unit that makes drilling a highly efficient and fully automated process
- Iron Boost: for a quick performance boost with increased torque when drilling through rebar
- Thanks to IP 55 water spray protection, drilling can be carried out under adverse conditions
- Operation within the optimum power band, for peak performance and longer core bit life, is easy with the aid of the LED power indicators
Applications
- Drilling through-holes and penetrations
- Blind holes for setting anchors or post-installed rebar
- Corner holes for sawing
- Manhole openings
- Stitch coring for installing cable trays
Technical Data
Documents
-
- Operating Instruction DD 350-CA (01), Italian, German, Swedish, Turkish, Russia, Ukrainian, Arabic, French, Portuguese, Spanish, Finish, Norwegian, Polish, Lithuanian, Latvian, Romanian, Bulgarian, Korean, Slovakian, Japanese, Estonian, Croatian, English, Kazakh, Chinese, Danish, Czech, Hungarian, Dutch, Greek, Slovene, [ 15.9 MB ]
Application videos
-
DD 350-CA – the coring machine with Cut Assist.
Instructions for use videos
-
DD 350/500-CA – Introduction
-
DD-HD 30 – Setting up with an anchor
-
DD-HD 30 – Setting up with the vacuum base plate
-
DD 350/500-CA – Mounting the motor
-
Hilti BL chuck – Fitting the core bit
-
Hilti BL chuck – Core bit removal
-
DD 350/500-CA – Hole-starting mode
-
DD 350/500-CA – Iron boost mode
-
DD-ST HCL – Fitting the hole centring laser
-
DD-HD 30 – Fitting the rail extensions
-
DD-HD 30 – Angular drilling
-
DD-HD 30 – Water collection system
-
DD 350/500-CA – Using large-diameter core bits
-
DD 350/500-CA – Draining water from the motor
-
DD 350/500-CA – Overhead drilling
-
DD AF-CA – Mounting the unit
-
DD AF-CA - Working algorithm
-
DD AF-CA – Additional features
-
DWP 10 – Water supply unit
-
Switching on and testing the PRCD
-
Sharpening the core bit